About this Course
3. Syllabus
|
Day No |
Date |
Time |
Topic to be covered |
|
1 |
13/02/2023 |
Class: 2 to 3 pm Practice: 3 to 5pm |
CSWA Certification syllabus and its significance, Introduction to Solidworks & its different modules, Sketch entities & constraints |
|
2 |
14/02/2023 |
Class: 2 to 3 pm Practice: 3 to 5pm |
Hands-on training on constraining a sketch using Solidworks and onshape (alternative in case solidworks is not available). |
|
3 |
15/02/2023 |
Class: 2 to 3 pm Practice: 3 to 5pm |
Introduction to part modeling features. Hands on practice on compound solid models using Extrude & Extrude Cut. |
|
4 |
16/02/2023 |
Class: 2 to 3 pm Practice: 3 to 5pm |
Introduction to revolve, revolve cut, draft, ribs features. Hands-on practice on a sample part model from CSWA. Using onshape as an alternative for CSWA. |
|
5 |
17/02/2023 |
Class: 2 to 3 pm Practice: 3 to 5pm |
Hands-on practice on two more sample part models from CSWA. |
|
6 |
20/02/2023 |
Class: 2 to 3 pm Practice: 3 to 5pm |
Hands-on practice on sample assembly models from CSWA. Challenges in using onshape as an alternative to solidworks for CSWA assembly modeling. |
|
7 |
21/02/2023 |
Class: 2 to 3 pm Practice: 3 to 5pm |
Hands-on practice on sample assembly models from CSWA. Challenges in using onshape as an alternative to solidworks for CSWA assembly modeling. |
|
8 |
22/02/2023 |
Class: 2 to 3 pm Practice: 3 to 5pm |
Hands-on practice on sample assembly models from CSWA. Challenges in using onshape as an alternative to solidworks for CSWA assembly modeling. |
|
9 |
23/02/2023 |
Class: 2 to 3 pm Practice: 3 to 5pm |
Live sample test attempt. Doubt clearance. |
|
10 |
24/02/2023 |
Class: 2 to 3 pm Practice: 3 to 5pm |
Hands-on Practice & doubt clearance session. |
|
Total |
30 Hours |
- |
|